Angki Apriliandi Rachmat

0
350

PERSONAL DATA

Date of birth                 : April 25th, 1981

Marital Status                : Married with two Children

Mobile / Whatsapp        : +62 8156031150

: +62 82121009925

Citizenship country        : Indonesian

E-mail                           : angki@polban.ac.id

angkiapriliandi@yahoo.co.uk

Institution                      : Politeknik Negeri Bandung

Institution address         : Jl. Geger Kalong Hilir, Ds. Ciwaruga, Bandung

Webpage                      : http://www.3dvia.com/angkiapriliandi

 

EDUCATION

2007 – 2010                    :  Mechanical Engineering at Institute of Technology Bandung (Magister) in Engineering Design Program

Thesis topic: Analysis of Local Axle Lining Reliability of CC201 and CC203 Locomotive.

2002 – 2004                    :  Mechanical Engineering at Bandung State Polytechnic (Bachelor applied science) in Production and Maintenance Program

Final Project Topic: Design of motorized wheel chair with ergonomic analysis

1999 – 2002                    :  Mechanical Engineering at Bandung State Polytechnic (Diploma III) in Maintenance Program

Final Project Topic: Design of multy stage hidraulic jack with 5 ton maximum load

1996 – 1999                    :  Senior high school at SMAN 1 Karawang in Science class

 

QUALIFICATION

  • Experience in Study Program of Mechanical Engineering Diploma IV Degree at Polytechnic, including, but not limited to; Curriculum, Learning outcome with KKNI, Subject distribution, Indonesian Accreditation (BAN PT), Recognition of Prior Learning, Student Center Learning, Problem based learning
  • Certify by DIKTI for learning outcome of Indonesian Qualification Framework (KKNI) Facilitators
  • Experience in Product Design Methodology, Product development, and reverse engineering
  • National Licensed Operator CATIA V5 for CAD, CAE and CAM
  • National Licensed Trainer CATIA V5 for CAD and CAM 3-axis machine
  • Advanced in 3D Solid, surface and sheet metal modeling, Assembly design and manufacturing drawing using CATIA V5
  • Advanced in technical drawing with AutoCAD
  • Advanced in DMU Kinematic, DMU Fitting, 3DXML, video presentation, optimization, image and shaping and Knowledge ware in CATIA V5
  • Experience in FEM Analysis and CNC Machine Programming in CATIA V5
  • Experience in technical drawing and machine drawing
  • Experience in Reliability Design and Assessment, Risk based Inspection and relevance codes.
  • Prepare in Jig & Fixture, Press tool, and Plastic Molding
  • Knowing maintenance management mojoring in maintenance performance indicator.

 

PUBLICATION

  • Study of Local Axle Lining Reliability of CC201 and CC203 Locomotive (Publish at Proceeding Seminar Nasional Tahunan Teknik Mesin XIII 2014, ISBN 978-602-98412-3-7)
  • Study of Asphalt Production from Buton Asphalt Aggregate (Publish at Prosiding Industrial Research Workshop & Seminar Nasional Sains Terapan 2010, ISBN 978-979-3541-21-1)
  • Proven of FEM CATIA V5 Computation Result at Thick-Walled Vessel with internal pressure load (Metrik Polban Journal-2009, Vol.3-No.02, ISSN 1411-0741)
  • Study of Core Element Design of Composite for Grease Trap as Cheap Material Alternative (publish at Spektrum Teknologi Journal-2008, Vol.15, ISSN 1829-7587)
  • Computational study of Megapro motorcycle rear footstep angle using FEM CATIA V5 (Publish at Polban National Proceeding- Polban 2006, ISBN 979-15638-0-2)
  • Design of Two Stages Hydraulic Jack. (Library of Bandung State Polytechnic)

 

ACHIEVEMENT

  • Official for Trinity Robot Contest, April 2015, Hartford, USA.
  • Achievement as Best Lecturer Honor of 2013 at Politeknik Negeri Bandung
  • Promotor for Student Creativity Program of Technology, July 18-22, 2011, Universitas Hasanuddin, Makassar, Indonesia.

 

LECTURE and SPEAKER EXPERIENCE

2013 – now : Lecture Creativity and Innovation at Diploma IV Mechanical Design and Constuction Enginering Study Program Polban
2012 – now : Lecturer design methodology with projects based learning at Diploma IV Mechanical Design and Constuction Enginering Study Program Polban
2006 – now : Lecture Machine Drawing and AutoCAD 2d
2005 – now : Lecturer CAD 3D – CATIA V5 ; Part Design, Surface Design, Sheet Metal Design, Assembly, Drawing, Digital Mock Up
November 2016 : Speaker for Internship Program at POS Indonesia Polytechnic
May 2016 : Speaker for Student Organisation Activities and Character Building at Jakarta State Polytechnic
January 2016 : Couching at design methodology project for Balai Besar Logam dan Mesin of Indonesia, Training Cooperation with Hanze University Netherland
October 2015 : Speaker for KKNI and Industrial Standard based Curriculum Development Workshop at Mechanical Engineering Study Program of Bangka-Belitung Manufacturing Polytechnic
August 2015 : Speaker for Recognition of Prior Learning Workshop at Heavy Equipment Study Program of Banjarmasin State Polytechnic
April 2015 : Speaker for “learning outcome” development at Mechanical Engineering Study Program of LPP Polytechnic, Yogyakarta
December 2014 : Facilitators for “Study Program Evaluation with KKNI and Learning outcomes needed” at Mining Study Program of Banjarmasin State Polytechnic
October 2014 : Speaker for “learning outcome” development at Bussiness Logistics Study Program of Indonesia Pos Polychnic
August 2014 : Speaker for “learning outcome” development at Mechanical Engineering Study Program of Indramayu Polychnic
2013 – 2014 : Lecture design for Academy Community Lecturer Candidate
2011 – 2014 : Lecture and Organize Design activities of Recognition of Prior Learning students
November 2013 : Trainer AutoCAD 2D for Engineering staff of PT. Jasa Marga (4 participants)
October 2013 : Trainer CATIA V5 for Mechanical Engineering Lecturer of Politeknik Indramayu (4 participants)
May 2013 : Trainer CATIA V5 for Engineering staff of Deperindag Kalimantan Selatan (4 participants)
January 2013 : Trainer CATIA V5 for Engineering division of PT. GMF AeroAsia (4 participants)
December 2012 : Trainer AutoCAD for Corporate Sosial Responsibility of Polban (20 participants)
September 2012 : Trainer CATIA V5 for Engineering staff of PT. Pindad (20 participants)
May & June 2012 : Trainer CATIA V5 for Astra Honda Motor Staff (4 participants)
August 2010 : Trainer CATIA V5 for Industry Staff (4 participants)
2006 – 2011 : Lecture Production Auxiliary Tool (Jid & Fixture, Press tool and Plastic Molding) Subject
January 2009 : Trainer CATIA V5 for PT. BADAK NGL Staff (2 participants)
September 2006 : Team Trainer CATIA V5R16 for lecturer of Politeknik Negeri Padang  (two-participants)

February –

March 2006

: Trainer CATIA V5R15 for Student college of Institut Teknologi Nasional (twelve participants)
December 2005 : Team Trainer for trainer CATIA V5R14 for lecturer of Politeknik Negeri Padang (2 participants)
October 2005 : Team Trainer for training of CATIA V5R14 for lecturer of Politeknik Negeri Lhokseumawe (4 participant)
August 2005 : Team Trainer for trainer CATIA V5R14 for Lecturer of Politeknik Negeri Malang (4 participant)
July – August 2005 : Team Trainer CATIA V5R14 for Student College
2004 : Technical Support IBM Indonesia for University of Indonesia Magister Program – CATIA V5R14

 

PROJECT and JOB EXPERIENCE

Dec 2014 – now : Vice Director of student affair for Politeknik Negeri Bandung
Mai – August 2016 : Research Asistance for electrical meter research at modeling and drawing divition
March – November 2016 : Research at Tool design aplication at CATIA V5 for bulge and hole plate forming with compound system
2009 – 2016 : Board of Director of KMLI (Indonesian Electric Vehicle Competition)
February 2016 : Reviewer of student research proposal at Polban
March 2015 : Team member of Indonesian fire fighting robots team for Trinity College International Contest at Hartford, Connecticut, USA
January – December 2014 : Responsible for Electricity-fuel Efficiencies Vehicle team of Polban ; Design, research, build, etc
2010 – 2014 : Head of Study Program for Mechanical Design and Construction Engineering ; Program responsibility, Accreditaion responsibility, Curriculum development, RPL project 2011-2014, Program promotion, internship responsibility, lecturer resourse management, etc
February – June 2014 : Promoter for student in wire drawing machine design and manufacturing project
March – June 2014 : Promoter for student in material powder green compaction press tool design and built project for future body armor
July 2013 : Responsible for Racing Electric Vehicle team of Polban
October – June 2013 : Team leader for Electric Vehicle research and competition
January – June 2012 : Promoter for Student Creativity Program (PKM) in subject: Vacum frying of mango chip
January – June 2012 : Adviser for design and built of fish pellet machine
January – May 2012 : Team Leader for drawing of any train component in Switzerland
October 2011 – February 2012 : Quality Improvement Assessment for KRDE/I at PT.KAI
July 2011 : Risk Assessment of Pipe Bridge and Obstacle at PT.PGN SBU III
June 2011 : Team leader of Connector Checker Fixture Design for PT. Banshu Plastic Indonesia
February – June 2011 : Promoter for Student Creativity Program (PKM) in subject: Styroform Recycle for plastic goods.
February – June 2011 : Promoter for Student Creativity Program (PKM) in subject: Insulation Cable Tester
February – May 2011 : FEED: Tempino-Plaju Pipeline Instalation Project for PT. Pertamina Gas as alignment sheet and pipe routing Supervisor.
February 2011 : Keynote Speaker in Maintenance Performance Indicator for Five  Balai Yasa of PT. Kereta Api Indonesia (Persero) in term of Quality Assurance in ISO 9001 Application.
December 2010 – January 2011 : Coordinator of Stress Analysis Project for Pipe and Manifold Deformation Inspection at SPG Merbau PT. Pertamina EP.
October – December 2010 : Team Leader of Wire-Rain Cover Blanking Machine Project for PT. Banshu Rubber Indonesia
November 2010 – January 2011 : Team Leader of Engineer and Manufacturer of Rescue Robot Leg Project for University Research
November 2010 : Team Leader of Fuse Durability Tester Equipment Project for PT. BEI
October 2010 : Modeler and Drafting of Fuse Housing of PT. Banshu Electric Indonesia Using CATIA V5
October 2010 : Team Leader of Fuse Intermittent Tester Equipment Project
October 2010 : Team Leader of Wire-Insulation Piercing Ability Tester Machine Project
September 2010 : Team Leader of Wire Adhesive Tester Machine Project
September 2010 : Team Leader of Wire-Insulation  Heat Distortion  Tool Project
August 2010 : Team Leader of Wire-Tube Dieelectric Breakdown Voltage Tester Machine
July – August 2010 : Study of dredging ship of PT. Timah Tbk.
July 2010 : Team Leader of Flex-Resistant Tester Machine project
January – June 2010 : Team of evaluation for train maintenance system of PT. Kereta Api (Persero), case study all of Balai Yasa and Depo around Indonesia
Jan – March 2009 : Team leader of wire fatigue bending testing machine project
Late 2008 – early 2010 : Co-promotor for Design and built of Button asphalt machine project in cooperation with Pusdiklat PU.
Late 2008 – early 2010 : Reliability analysis for axle lining locomotive of PT. Kereta Api (Persero), case study at Locomotive Depo of Bandung
June – August 2008 : Team leader of Harness flexibility testing machine design and built
August – Nov 2008 : Team leader of Harness torque ability testing machine design and built
December 2007 – March 2008 : Team of evaluation for LNG Plant Reliability, case study; PT. Badak NGL and PT. Arun NGL.
April-October 2007 : Research in Composite fiiler design for grease trap as cheap material alternative.
August 2006 : Project in modeling amount of train components for Stadler.CH Switzerland from PT. Design & Teknik Indonesia
2002-2005 : Various projects in CATIA V5; train components, hydraulic tracker, motorized wheelchair, solar car, 2 stage hydraulic jack, etc.

 

LEAVE A REPLY

Please enter your comment!
Please enter your name here